38A Abrasive. High purity aluminium oxide abrasive. Friable grain renews sharp cutting edges for good product life. Good cut rate and reduced heat generation on hardened or high-speed tool steels. Ideal for heat-sensitive applications ideally in low/medium pressure applications. Ideal for use on all steel hardnesses.

Diameter: 200mm

Width: 25mm

Bore or hole diameter: 32mm. Reducing bushes are available: 1/2"(12.7mm), 5/8"(15.88mm), 3/4" (19.85mm), 7/8"(22mm), 1"(25.4mm).

Manufactured for Abtec by Norton in the EU.

• Specification: 38A 46 LVS, 38A 60 LVS, 38A 80 NVS, 38A 80 KVS, 38A 100 JV. Please select from drop-down box.

Maximum RPM: 4300 (45 M/S)         Application: Grinding of medium to hard steels.

• For your safety all Norton, Flexovit, Klingspor, Dronco, Tyrolit and Abracs grinding and cutting wheels conform to the 'Organisation for the Safety of Abrasives'. This requires members to manufacture and document abrasive products to the highest safety standards.
• You should ensure that you are fully informed on the safe operation of abrasive cutting and grinding wheels. More on training in the use of cutting and grinding wheels........
• Our Customer Services team is here to help with your inquiry for technical advice, bulk prices and non standard products. Click here to contact us now

Please choose 'Reducing bushes' if required from the drop-down box.  

More information? You can speak with one of our representatives free in the U.K. Monday-Friday between 8.30 a.m. and 5.00 p.m. on 0800 027 1928 or +44 (0) 1945 585500.