16mm x 20mm x 6.35mm MA 60 KV Grinding wheel

Diameter: 16mm

Width: 20mm

Bore or hole size: 6.35mm

Shape: Plain sided

Specification: MA 60 KV. Application: Internal grinding of soft to medium steels.

Speed: 41780 RPM

Product Code: 160201683

Because the workpiece is 'wrapped around' the wheel instead of going away from it internal grinding results in a larger contact area than in external cylindrical grinding. In general, this requires softer grade wheels to be used. The geometric relationship between the workpiece and the wheel can also restrict the flow of grinding fluid into the grinding zone and care should be taken in coolant application. As a general rule the wheel diameter should be approximately 75% of the diameter of the hole being ground. To avoid 'bellmouthing' of the component, only one-third of the wheel width should be allowed to pass out of each end of the hole being ground. 

You should ensure that you are fully informed on the safe operation of abrasive cutting and grinding wheels. More on training in the use of cutting and grinding wheels........

More information? You can speak with one of our representatives free in the U.K. Monday-Friday between 8.30 a.m. and 5.00 p.m. on 0800 027 1928 or +44 (0) 1945 585500.