• Type 1. Power continuous rim turbo diamond cutting blades (fine cut) are designed for more accurate cutting of concrete, concrete roofing tiles, fireproof stones, gneiss, granite, terrazo and bricks. Ideally the cutting depth should not exceed 2 cm to gain maximum advantage in using these blades.
• Type 2. Laser welded dry or wet cutting blades are a more robust diamond blade for angle grinders and portable cutting machines and are available from stock as a universal specification for most building materials including concrete, exposed aggregate, concrete border stones and granite.
• Type 3. A high performance laser welded diamond blade, longer lasting than a sintered or all purpose blade. Rigid bond designed for cutting a wide range of abrasive materials including sand-lime stone, floor pavement, plaster, sandstone, porous concrete, brick and pantiles.
• Type 4. A high performance laser welded diamond blade, longer lasting than a sintered or all purpose blade. A well balanced blade designed for cutting a wide range of concrete materials including re-inforced concrete, exposed aggregate concrete, composite concrete paving, concrete roofing tiles and terrazzo.

  Type	Blade Diameter	Blade Width	Hole Size	Maximum Operating Speed	Maximum RPM	Abtec Part No.
  1	230mm	2.6	22.23	80 M/S	6650	ST0572
  2	230mm	2.4	22.23	80 M/S	6650	DMP230222
  3	230mm	2.4	22.23	80 M/S	6650	70325
  4	230mm	2.4	22.23	80 M/S	6650	706230

Remember. All blades when used incorrectly can be dangerous. Please use the correct safety equipment and read the machine manufacturers recommendations. For more information please contact customer services or visit our abrasive wheel safety and training site.

Price per blade. Please choose blade from the drop-down box below.  

More information? You can speak with one of our representatives toll-free in the U.K. Monday-Friday between 8.30 a.m. and 5.00 p.m. on 0800 027 1928 or +44 (0) 1945 585500.