Diameter: 180mm (7")

Width: 6mm (1/4")

Bore or hole diameter: 31.75mm (1 1/4"). Reducing bushes are available: 1/2"(12.7mm), 5/8"(15.88mm), 3/4" (19.85mm), 7/8"(22mm), 1"(25.4mm).

Manufacturered for Abtec by Tyrolit in the EU.  More on the Tyrolit group.

Shape: Plain sided

Specifications available:

Specifications: WA 46 KV, WA 60 KV, WA 80 KV, WA 100 KV, WA 100 LV, WA 120 KV, WA 150 KV, WA 220 KV

Maximum RPM: 3710         Application: Grinding of medium to hard steels.

Specification: 454A 60 LV

Maximum RPM: 3710               Application: Grinding of hard and difficult to grind tool steels.

Specification:  GC 100 IV

Maximum RPM: 3710         Application: Grinding of tungsten carbide.

For more detailed information please visit  the grinding section of our main web site or contact customer services.

The application is our recommendation based on the specification.

Please choose 'Specification' and 'Reducing bushes' if required from the drop down boxes.

Manufacturered by Tyrolit in the EU. More on the Tyrolit group.

For your safety all Tyrolit grinding and cutting wheels conform to EN12413. Tyrolit are also members of the 'Organisation for the Safety of Abrasives'. This requires members to manufacture and document abrasive products to the highest safety standards. More on the 'OSA'

You should ensure that you are fully informed on the safe operation of abrasive cutting and grinding wheels. More on training in the use of cutting and grinding wheels........