Diameter: 125mm (5")
Wall height: See specification
Bore or hole size: See specification Maximum RPM: 5730
Specifications:
-
GC 60 JV (Green) Wall height 40mm ( 1 1/2"). Bore size 31.75mm ( 1 1/4"). Reducing bushes are available. See drop-down box. Grinding of tungsten tipped tooling. Medium finish.
The specification is the composition of the wheel and comprises of the following:
-
The abrasive type. (e.g WA...is aluminium oxide abrasive. GC...is silicon carbide abrasive.SG3 ...is micro-crystalline ceramic abrasive.)
-
The grit or grain size. (e.g. ..54.. is the size of the grain. The lower the number the larger the grain size. Therefore 60 is a larger grain size and coarser than 80.
-
The next letter or word will describe the hardness of the bond that holds the abrasive grain or grit together. For bench and pedestal grinders the words ..Hard..Medium...will be used to describe the hardness of the bond but for other wheels a letter usually from ..E..(soft bond) up to ..U..(hard bond) will be used. Therefore ..J.. is a softer bond than ..K..
-
The next letter describes the type of bond. Their are a several but the main type used is shown as ..V and represents vitrified bond. Vitrified bond is very brittle. The bond is resistant to high temperatures that grinding produces.
For more detailed information please visit the grinding section of our main web site or contact customer services.
Remember. All wheels when used incorrectly can be dangerous. Please use the correct safety equipment and read the machine manufacturers recommendations. For more information please contact customer services or visit our abrasive wheel safety and training site.
Price per wheel. Please choose specification and reducing bushes from the drop-down boxes below.
More information? You can speak with one of our representatives toll-free in the U.K. Monday-Friday between 8.30 a.m. and 5.00 p.m. on 0800 027 1928 or +44 (0) 1945 585500.
